My headers are tight against the oil filter—how can I gain clearance?

If your headers are positioned too close to the oil filter, follow these steps to create additional clearance:

1. Remove the rear mounting bolt from the exhaust system.

2. Spray WD-40 or a light lubricant on the slip-fit connections near the oil filter.

3. Gently pull or adjust the entire exhaust system outward to create space between the header and the filter.

4. Once adequate clearance is achieved, retighten the rear mounting bolt to hold the new position.

This method typically provides about 1/8 inch of clearance with a stock oil filter, which is sufficient for safe operation.